Your Quote Request  |  Checkout   

LAWN & GARDEN EQUIPMENT

CHIPPER, VERMEER BC700XL

Manufacturer: VERMEER

Model: BC600XL

4 Hour: $140.00

Daily: $200.00

5 Day: $800.00

Monthly: $2,400.00

Quantity: for a period of  
4 hour(s)   day(s)   5 day(s)   month(s)  

Additional Information

  • BC700XL BRUSH CHIPPER
  • GENERAL DIMENSIONS AND WEIGHTS
  • Length - Feed Table Up, Tongue In
  • 113"
  • Length - Table Down, Tongue Extended
  • 133"
  • Width
  • 71"
  • Height
  • 102"
  • Weight - Engine Option One
  • 1800 lbs
  • Tongue Weight - Engine Option One
  • 180 lbs
  • Kohler ECH740
  • Gross Horsepower (Maximum)
  • 25 hp
  • Torque (Max)
  • 41.7 ft-lb
  • Fuel Tank Capacity
  • 6 gal
  • Max Fuel Consumption
  • 2.4 gph
  • Fuel Type
  • Gasoline
  • Air Cleaner
  • Kohler HD 2-Stage Dry
  • Oil Filter
  • Spin-on
  • Recommended Oil
  • Kohler oil or API CH4/SJ
  • Oil Volume with Filter
  • 2 qt
  • Maximum Angle of Continuous Operation
  • 25 deg
  • Cooling Medium
  • Oil/Air
  • Alternator
  • 20A Charging
  • Clutch Type
  • Centrifugal PTO
  • Clutch Drive Engagement
  • Centrifugal
  • FEED SYSTEM
  • Feed Roller Orientation
  • Horizontal
  • Feed Roller Clamp Load
  • 525 lbs
  • Feed Roller Clamp Type
  • Spring/Feed Roller Weight
  • Feed Roller Minimum Distance to Drum
  • 4"
  • Feed Roller Dimension
  • 10
  • Weight of Feed Roller
  • 100 lbs
  • Motor Displacement
  • 14.2
  • Motor Manufacturer
  • White Hydraulics
  • Feed Speed
  • 49.4 ft/min
  • Infeed Table Width
  • 41.2"
  • Infeed Table Length
  • 30.2"
  • Infeed Hopper Height
  • 22.1"
  • Infeed Throat Capacity
  • 6" x 8"
  • Pinch Point - Distance to End of Feed Table
  • 65.4"
  • Distance from Feed Table to Ground
  • 28.1"
  • SAFETY SYSTEM
  • Bottom Feed Stop Bar
  • Standard
  • Bottom Feed Stop Bar Diameter
  • 2"
  • Bottom Feed Stop Bar Material Thickness
  • .12
  • Reset Method
  • Dual green hold-to-run buttons
  • Four Position Feed Control Bar
  • Standard
  • Diameter
  • 2"
  • Material Thickness
  • .1"
  • Positions
  • Four position: (E-Stop), Forward, Stop, (Reverse)
  • Green Hold to Run Button
  • Standard
  • DRUM/DISC CUTTING SYSTEM
  • Material Capacity
  • 6"
  • Width
  • 8"
  • Thickness
  • 1.3"
  • Diameter
  • 23.9"
  • Speed
  • 1748
  • Weight With Shaft
  • 176 lbs
  • Knife Thickness
  • .6"
  • Material
  • A8 Chipper Steel
  • Replaceable Threaded Knife Block
  • Yes
  • Fixture Method
  • Welded
  • Air Flow
  • 5000 cfm
  • Bedknife Size
  • 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert
  • Bedknife Material
  • ASTM A572 Grade 50
  • CUTTER DRIVE COMPONENTS - ENGINE OPTION ONE
  • Bore
  • 1.5"
  • Type
  • Flange-mounted ball type, self-aligning
  • Manufacturer
  • Linkbelt
  • Dynamic Capacity
  • 5640 lbs
  • Static Capacity
  • 4460 lbs
  • Belt Idler/Tensioner
  • Spring-loaded adjustable Idler
  • Belt Type
  • 2-band 5-V profile Aramid
  • DISCHARGE SYSTEM
  • Chute Height
  • 97.2"
  • Bottom Thickness
  • .1"
  • Top Thickness
  • .1"
  • Side Wall Thickness
  • .1"
  • Deflector Thickness
  • .1"
  • Chute Rotation Angle
  • 240 deg
  • Rotation Type
  • Manual
  • Rotational Lock
  • Standard Latch
  • HYDRAULIC SYSTEM
  • Tank capacity
  • 6.8 gal
  • Recommended Oil Type
  • Vermeer VMF Gold
  • System Type
  • Open center
  • Filtration Method
  • Return flow filtration, 10 micron
  • Pump Flow at Maximum RPM
  • 3.8 gpm
  • System relief pressure
  • 2500 psi
  • 172.4 bar
  • ELECTRICAL SYSTEM
  • System Voltage
  • 12 Volt
  • Battery
  • Group 26, 400 CCA
  • Standard Gauges
  • Hour meter
  • Switches
  • Hold-to-run, sensitivity selector
  • Controller
  • Vermeer ACS CB02
  • CHASSIS
  • Frame Description
  • 3/16"/(.5 cm) ASTM A1011 steel
  • Hitch Type
  • 2"/(5.1 cm) ball coupler
  • Fender Description
  • .1"/(.3 cm) Steel bolt-on
  • Axle/Suspension
  • 2000 lb/(907.2 kg) rubber torsion axle
  • Type - Option One
  • Rubber Torsional
  • Manufacturer - Option One
  • Dexter
  • Capacity - Option One
  • 2000 lb/(907.2 kg)
  • Tires - Option One
  • ST185/80D13 load range D
  • Wheels - Option One
  • 13 x 5, bolt circle 5 on 4.5
  • Axle/Suspension - Option Two
  • 2000lb/(907.2 kg) rubber torsion axle with electric brakes
  • Type - Option Two
  • Rubber torsional, braked
  • Manufacturer - Option Two
  • Dexter
  • Capacity - Option Two
  • 2000 lb/(907.2 kg)
  • Brake Type
  • Electric optional
  • Trailer Light Type
  • LED

 * Prices are subject to change. Tax and other fees are not shown in this price estimate.

* Please call us with any questions about our chipper vermeer bc700xl rentals in Yucca Valley CA, Palm Springs, Palm Desert, San Bernardino, and Twentynine Palms.